Why PET preforms that pass inspection can still fail in production

PET preforms that pass routine quality checks can still create problems during bottle production due to variations in heating and blowing behaviour, according to systems supplier Blow Moulding Technologies (BMT).

Standard inspection methods, including dimensional testing, weight checks and polarised light testing, can identify certain material and geometric issues. However, BMT said these checks do not directly assess how a preform will behave during the stretch blow moulding process.

Two preforms can meet the same specifications and pass visual inspection while behaving differently once they reach the bottle line. These differences may only become visible after production has started, resulting in additional troubleshooting, machine adjustments and operator intervention.

Temperature behaviour

Preform temperature behaviour plays a key role in bottle performance, according to BMT. If a preform heats differently, it can stretch differently during blowing, affecting the final bottle characteristics.

BMT used its Thermoscan solution, which measures preform temperature profiles, to investigate a bottle production process that had previously operated successfully but later experienced quality variations despite using the same recipe and oven settings.

Figure 1
An illustration taken during a preform testing process, showing how material behaviours evolve throughout the blowing process

The investigation found that variations originating during the injection moulding process had affected thermal behaviour and contributed to inconsistent blowing performance. BMT said the bottle line was not the root cause of the issue, with the variation originating in the preform.

In another case, a manufacturer experiencing problems linked to a material batch required an expert process technician to visit its site six times within two months to resolve production challenges. Previously, the same manufacturer had required six visits over an entire year.

These examples show how difficult preform-related issues can be to diagnose once production is underway, with manufacturers often investigating downstream equipment when the source of variation exists earlier in the process.

Material composition

BMT noted that understanding preform behaviour is becoming increasingly important as manufacturers introduce higher levels of rPET, bio-based materials and other sustainability-focused materials. Changes in material composition can influence processing performance, making early validation important before full-scale production trials.

To help identify variations before they reach production, BMT has developed Blowscan, a preform testing system that assesses heating and inflation behaviour alongside overall blowing consistency.

Josh Turner, delivery manager at BMT, said: “Despite extensive quality checks, manufacturers can still encounter batches that perform differently during blowing. The challenge is that these differences often only become apparent once production has started.

“By comparing blowing behaviour against a validated reference, manufacturers can identify variation earlier and gain greater confidence that every batch will perform as expected.”

Figure 2
Visual analysis and process data generated by Blowscan provide a quantitative assessment of preform blowing behaviour
Why PET preforms that pass inspection can still fail in production

Related content

Latest news

Nelipak acquires US flexible packaging manufacturer

Nelipak Healthcare Packaging has acquired US flexible packaging manufacturer Technipaq, expanding its production capabilities for sterile-barrier healthcare packaging in the Americas. Technipaq, headquartered in Crystal...

Reconomy opens £20m UK plastics recycling plant

Reconomy, an international circular economy specialist, has officially opened a £20 million (£26.48m) plastics recycling facility in Corby, Northamptonshire, England, with the capacity to...

Sponsored content

Why PET preforms that pass inspection can still fail in production

Sign up to our newsletter to stay in the loop

Weekly news bulletin and monthly round-up